原文:I can't say any more than simply, I love it! Easily adjustable, rotate your tablet to any position. The little tools to tighten up any loose joints is easy to use. AND the fact it comes with two mounting brackets - I LOVE THAT. I'm still trying to decide where I may want to permanently place tha
t second bracket - one is in the kitchen, for recipes and shopping lists. The second one - I'm really contemplating putting it outside, on the wall next to the hot tub...It is very easy to slide the tablet holder out of one mounting bracket to tuck it into the other bracket mounted elsewhere. The fact that this can hold my large and small tablets and kindles is just the best thing EVER! And love that it is removable and can used as a table top stand without the mounting bracket, (that's how I decided on which side of the stove I wanted the mounting bracket placed under which cabinet - I kept it on one side of the stove on the counter top for a few weeks, then on the other side for a couple more weeks.) It has long screws if you need them, and a few different thicknesses of spacers in case your cabinets have a lip around the rim underneath them - mine don't, but it is nice to know they thought of that. Everything you need to mount the brackets is included - even the wall anchors! Okay, not everything, you will need a screw driver, and maybe a drill, (or nail and hammer), to make starter holes for the screws, plus a pencil to mark when the holes go. Oh, a piece of tape to hold the bracket to the bottom of the cabinet while screw in the first screw is helpful, too. Other than those items - everything you need is included! :)
显示更多>>
译文:
我不能更简单地说,我喜欢它!轻松调整就可以将您的平板电脑旋转到任何位置。收紧任何松动关节的小工具易于使用。和它的两个安装支架的事实 - 我喜欢这款。我仍然试图决定在哪里再永久的放置第二个支架 - 一个在厨房里,可以用于食谱和购物清单。第二个 - 我真的考虑把它放在外面,在热水浴缸旁边的墙上...安装支架滑动平板电脑座很容易将其压入安装在其他地方的另一个支架。事实上,这可以让我的大小小的平板电脑很好保持的事情!并且喜欢它是可拆卸的,可以用作没有安装支架的桌面支架(这就是我决定在炉侧我想安装支架放置在柜我把它放在炉子一侧的柜台前几周,然后在另一边在几周的时间。)如果你需要它,它有很长的螺丝,和几个不同厚度的垫片,以防你的柜子在他们下面的边缘有一个口- 我并不需要,但是很高兴知道他们想到了。包括安装支架所需的一切 - 甚至墙壁锚!好的,不是一切,但你需要一个螺丝刀,也许需要一个钻头(或钉子和锤子),为螺丝起始孔,加上一支铅笔来标记孔。哦,一个可以将其固定在机箱底部的磁带,同时拧在第一根螺丝上也是有帮助的。除了这些项目 - 你需要的一切都包括在内! :)